For screen reader problems with this website, please call616-288-10206 1 6 2 8 8 1 0 2 0Standard carrier rates apply to texts.

 VISIT OUR TWO SHOWROOMS IN: GRAND HAVEN | GRAND RAPIDS » | WE'RE HIRING! LEARN MORE »
We Pay You To Pick Up – Save 10%

Anthem® Integrated Amplifier

Model #: INTEGRATED225
12385
Anthem
At a Glance
Anthem® Integrated Amplifier with phono stage, line stage preamplifier, power amplifier, 225 continuous watts per channel and remote control
Price Starting At
$1,799.00Save $NaN
$1,799.00

Get to know this product.

High-Quality, Close-Tolerance Parts

  • As with all Anthem components, the Integrated 225 boasts all parts of high quality and close tolerance, including metal film resistors and high-quality film signal capacitors.
  • The result is the lowest possible total harmonic distortion plus noise. To prevent one source from interfering with another, critical inputs are individually buffered.

Built-In Phono Stage

  • Designed specifically to accommodate today s high-quality Moving Magnet phono cartridges, the Integrated 225 s built-in phono stage will delight even the most die-hard vinyl enthusiast.
  • Since the job of the phono stage is to supply most of the gain, two factors are critical in achieving the highest level of playback quality: a superior approach to RIAA equalization and the quality of amplification used to step-up cartridge output to line-level voltage.

The Power Within

  • The integrated 225 s main power supply boasts an advanced generation toroidal transformer, a major contributor to the low-noise floor. This massive transformer is conservatively rated and designed with high rail voltage. It feeds two oversized (51 mm x 80 mm) low-ESL, low-ESR Nichicon filter capacitors employing a total capacitance of 30,000 microfarads.
  • The main power supply also features ±15 V rails for the preamp audio circuits fed by two precision voltage regulators. An additional precision voltage regulator is used in the standby power supply. The Integrated 225 s main power supply is active during on mode while standby power supply remains active in both on and standby modes.

Heat Sinks Computer-Designed And Modeled

  • Large custom heatsinks, one for each amplifier channel, ensure that the Integrated 225 dissipates heat quickly and efficiently. Computer designed and modeled, their job is to maximize heat transfer
Specifications

Certifications

THD:0.05

Specifications

Power On Consumption (watts):800
Signal to Noise Ratio:83 dB
Watts RMS per Channel (4-ohms):330
Watts RMS per Channel (8-ohms):240

Misc. Specs

Depth (in.)18
Height (in.)17.25
Impedance30 ohms
Width (in.)5.88
Headset JackYes
Product Weight (lbs.)42.6
WarningProposition 65 Warning for California Residents